The 683 is the largest speaker in the 600 Series. A true three-way floorstander, ideal for both stereo or home theatre applications in larger rooms, where its timeless look allows it to fit into any interior.
The imposing 683 is the genuine three-way speaker of the 600 Series, with a line-up of technologies and a level of performance that defies its entry-level place in the market. For large rooms, two 683s make a formidable partnership, either for stereo hi-fi or fronting a home theatre installation.
Deep, dynamic, bottom-end power is delivered by a pair of aluminium/paper/Kevlar® composite cone bass drive units. The 150mm Kevlar® midrange handles middle frequencies with its characteristic clarity and tunefulness, but, for the first time in a 600 Series speaker, includes FST cone surround technology for extra detail and resolution. The Nautilus™ tube-loaded, aluminium dome tweeter, featuring a new surround material to improve spaciousness and imaging, adds needle-sharp top end all the way to 50kHz and beyond.
The improvements to the drive units in the new 600 Series make it possible, for the first time, to introduce a minimalist crossover to the range. The use of components that are fewer in number but higher in quality – hand-picked in exhaustive listening tests – reduces the degradation of the signal significantly. So, whether you’re enjoying hi-fi or home cinema, what you hear is that much closer to what was recorded.
Specification
| Model | B&W 683 |
| Discription | 3-Way vented-box system |
| Built From | |
| Power Handling | 200 watts |
| Recommended amplifier power | 25 - 200 watts |
| Frequency range | -6dB at 30Hz and 50kHz |
| Frequency response | 38Hz - 22kHz +/-3dB on reference axis |
| Sensitivity | 90 dB spl(2.83V, 1m) |
| Nominal impedance | 8ohms (minimum 3.0ohms) |
| Tweeter | One 25mm Aluminium Dome Tweeter |
| Midrange Driver | One 150mm woven Kevlar Cone |
| Midbase Driver | N/A |
| BASS Driver | Aluminium/Paper/Kevlar Cone Bass |
| LOW to MID-FREQUENCY CROSSOVER | 350Hz |
| MID to HIGH FREQ CROSSOVER | 4kHz |
| External Dimensions excl Stand (H x W x D) | 985 x 198 x 340mm (38.8 x 7.8 x 13.4in) |
| Terminal Input | 4 Terminal Bi Amp Gold Plated Post |
| Weight | 26kg |
| FINISHES | Black and Red Cherry |
| Configuration Options (Stereo and.or HT) | Stereo and Home Theater use |
No comments:
Post a Comment